TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer

TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market.

Additional information can be found at www.ttm.com

Scope:

The Oxide Operator uses wet chemistry to etch circuit images and apply oxide to panels. Operators develop resist from layers, etch to remove copper that is not protected by resist, and strip off resist that was left from develop and etch cycles to expose circuit. Process panels through developer to remove excess resist on all unexposed areas of panel.

This job will be located at 8192 Southpark Ln, Littleton Co, 80120.

This is a 2nd shift position with the hours of 3:00 - 11:30 PM, Mon-Fri. Overtime as needed. Position is eligible for $2.00 hourly 2nd shift premium.

Duties and Responsibilities:

• Check ph to ensure it remains within established limits.
• Run break test to determine conveyor speed for developing.
• Check developing solution for proper concentration as specified by MPP.
• The resist strip process is the removal of photo resist exposing the copper circuits.
• Monitor and maintain proper solution levels on all rinse sumps.
• Change solutions per tank maintenance.
• Verify solution temperatures.
• Ability to process first article panel.
• Monitor to insure uniform and constant flow of work through appropriate resist stripper.
• Follow all preventive maintenance schedules.
• Follow all requirements for waste treatment.
• Inspect panels for defects.
• Cupric etching is a process whereby exposed copper is dissolved into a cupric based etchant.
• Process panels per inner layer MPP:
• Maintain automatic chemical feed and bleed systems.
• Monitor and maintain proper solution levels on all rinse sumps.
• Change solutions per tank maintenance or preventive maintenance.
• Verify etchant temperatures.
• Monitor etchant specific gravity.
• Run spray nozzle test and etch break test daily.
• Process first article panels.
• Measure spacing and line width with microscope.
• Set and monitor conveyor speed depending on copper thickness.
• Monitor process to insure uniform and constant flow of work through etcher.
• Follow all preventive maintenance schedules.
• Follow all requirements for waste treatment.
• Inspect panels for defects.
• Perform other duties as assigned.

Note: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Essential Knowledge and Skills:

• Functional English skills (reading, writing, speaking)
• Attention to detail
• Adherence to all safety requirements of the position
• Ability to lift 50 lbs.
• Ability to work with chemicals.
• Ability to work on feet for entire shift.

Education and Experience:

Education:

• High school diploma or GED

Required Experience:

• No experience required. We can train candidates with mechanical aptitude.

Preferred Experience:

• Experience in production, manufacturing or related job. PCB industry experience desirable.CNC or related work experience preferred.

#LI-RK1

TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered.

Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is:

Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location.

Export Statement:
Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition ofForeign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.